Produce, Finish, Inspect, Package, and Label Parts Produced by Injection Molding Machines

 

3rd shift

$1,000 sign-on bonus!

Hours are 11pm-7am Sunday-Friday, start at $20.14/hour.

 

We have openings for a Production Technician on 3rd shift  to produce, finish, inspect, package, and label parts produced by injection molding machines.

  • Reads written work instructions to operate injection molding equipment in manual and semi-automatic mode.
  • Visually inspects finished parts for defects according to the control plan.
  • Identifies and documents quality problems, following established quality control procedures.
  • Clips or trims finished parts using hand tools such as X-Acto knife, clippers, or pliers.
  • Assembles finished parts with or without additional non-molded components.
  • Measures finished parts using measuring instruments such as calipers and micrometers.
  • Operates various pieces of secondary equipment, including mills, CNCs, and drill presses.
  • Weighs and packages finished parts.
  • Assembles boxes for packaging.
  • Monitors scrap, and completes Scrap Reports as needed.
  • Provides backup assistance in production and/or assembly as assigned.
  • Follows all established safety policies and procedures.
  • Supports the Lean Manufacturing initiatives of the company.
  • Performs other duties as assigned by the Supervisor.

If you are interested in working in an environment where Optimism, Innovation and Teamwork are among our core values, then you’re invited to explore this opportunity further.

 

A Workplace With Integrity

  • Your voice is heard
  • Your ideas are welcomed
  • Your mind is challenged
  • You enjoy great benefits 
  • You share our core values: optimism, innovation, and teamwork
  • You care that your employer follows green initiatives and has a culture of responsibility to the environment and community
  • Kaysun Corporation is an equal opportunity employer. Females, minorities, protected veterans, and individuals with disabilities are encouraged to apply

EMPLOYEES (THIS COULD BE YOU!) ARE OUR GREATEST ASSET

flexible_icon

We offer a flexible and empowering work environment.

learning_icon

We support and encourage lifelong learning and professional development.

improvement_icon

We embrace continuous improvement at all levels of the organization.

success_icon

We have fun and celebrate success!

Job Requirements & Working Conditions

dot_separator
kaysun_employees_in_conference_room_meeting
  • High School Diploma or GED preferred; in lieu of degree must be able to read/speak/write/comprehend English and be able to perform basic measurements.
  • Must have good verbal, written and interpersonal communication skills, with the ability to read and comprehend simple instructions and correspondence in English language. Must also be able to effectively communicate information in one-on-one situations to other employees of the organization.
  • Must be able to read and interpret documents such as safety policies and rules, operating and maintenance instructions, and procedure manuals, in English language.
  • Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  •  
kaysun_teammates_going_over_sheet
  • Must be able to compute rate, ratio, and percent and to draw and interpret bar graphs.
  • Must be able to apply common sense understanding to carry out detailed written or verbal instructions, and the ability to deal with problems involving a few concrete variables in standardized
    situations.
  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate to loud.
  •  
kaysun_employee_with_safety_glasses_smiling
  • While performing the duties of this job, the employee is regularly required to stand and walk for a full shift. The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, bend, crouch, or crawl and talk or hear. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  •  

Benefits

dot_separator
  • Health Insurance
  • Dental Insurance
  • Vision Insurance
  • Disability Insurance
  • Life Insurance
  • Flex Spending
  • HSA (health savings account)
  • Personal Time
  • Vacation Time
  • Quarterly Profit-Sharing Bonus Program
  • 401k Savings Plan (with match)
  • Education Reimbursement

Other Benefits

wellness3

EMPLOYEE WELLNESS

  • Gym Membership Reimbursement (75%)
  • On-site Fitness Center with free yoga and fitness classes led by professional instructors
  • Custom Outdoor Workout Spaces
  • Health Incentives/Health Risk Assessments
Kaysun team planting trees for Arbor Day

SOCIAL RESPONSIBILITY

  • Employee Garden
  • Employee-led Green Team 
  • Community Involvement Opportunities

gold_arrows_down


Four Ways to Apply

dot_separator

1. E-mail your resume to employment@kaysun.com
2. Download application forms and submit to Kaysun Corporation (Clickable Links)

3. Complete our online application process, which is linked to the 5-step job application (see "Apply Now" button at top of page). 
4. Visit our facility during business hours to pick up an application

Kaysun Corporation, 5500 West Drive, Manitowoc, WI 54220
Monday – Friday, 8:00 AM – 5:00 PM

Any questions? Please call Kaysun at 920.686.5800.