Production Technician -
Part-Time 1st and 2nd Shifts

We have an opening for a Production Technician to produce, finish, inspect, package, and label parts produced by injection molding machines to support our 1st shift on a part-time basis.

Part-time employment is being offered for 3-5 days per week totaling less than 30 hours per week. Saturday work may be available.

PT 1st shift 8:30 am – 2:00 pm (1 opening)
One-15 minute paid break will be given during the shift.

  • Part-time employees will be eligible to participate in Kaysun’s wellness benefits including 75% fitness club membership reimbursement, free onsite fitness and yoga classes led by qualified instructors from local health/wellness companies, and free use of Kaysun’s indoor and outdoor fitness facilities.

Primary responsibilities include the following:

  • Reads written work instructions to operate injection molding equipment in manual and semi-automatic mode.
  • Visually inspects finished parts for defects according to the control plan.
  • Identifies and documents quality problems, following established quality control procedures.
  • Clips or trims finished parts using hand tools such as X-Acto knife, clippers, or pliers.
  • Assembles finished parts with or without additional non-molded components.
  • Measures finished parts using measuring instruments such as calipers and micrometers.
  • Operates various pieces of secondary equipment, including mills, CNCs, and drill presses.
  • Weighs and packages finished parts.
  • Assembles boxes for packaging.
  • Monitors scrap, and completes Scrap Reports as needed.
  • Provides backup assistance in production and/or assembly as assigned.
  • Follows all established safety policies and procedures.
  • Supports the Lean Manufacturing initiatives of the company.
  • Performs other duties as assigned by the Supervisor.

Job Requirements/Working Conditions:

  • High School Diploma or GED required.
  • Must have good verbal, written and interpersonal communication skills, with the ability to read and comprehend simple instructions and correspondence in English language. Must also be able to effectively communicate information in one-on-one situations to other employees of the organization.
  • Must be able to read and interpret documents such as safety policies and rules, operating and maintenance instructions, and procedure manuals, in English language.
  • Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Must be able to compute rate, ratio, and percent and to draw and interpret bar graphs.
  • Must be able to apply common sense understanding to carry out detailed written or verbal instructions, and the ability to deal with problems involving a few concrete variables in standardized situations.
  • While performing the duties of this job, the employee is regularly required to stand and walk for a full shift. The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, bend, crouch, or crawl and talk or hear. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate to loud.

If you are interested in working in an environment where Optimism, Innovation and Teamwork are among our core values, then you’re invited to explore this opportunity further.

To apply, please submit your resume to, mail a resume, or visit Kaysun Corporation during regular business hours: 8:00 a.m. – 5:00 p.m. Monday – Friday at 5500 West Drive Manitowoc, WI 54220. Please specify that Part-Time employment and desired days/hours you are available to work.

You may also apply online by clicking the button below.


Kaysun Corporation is an equal opportunity employer.
Females, Minorities, Protected Veterans, and Individuals with Disabilities are encouraged to apply.

Watch this video for more on the advantages of working with Kaysun.

Markets We Serve



Explore how we solve critical applications in the Medical industry

Consumer & Industrial


Learn how we use scientific molding for Consumer and Industrial applications



See how we meet highly demanding Military specifications



Discover how we ensure quality for critical-use Automotive applications